HDMI Over Coaxial , With IR , Distance Of 100-300 Meters , Extender
Introduction
HDMI to SDI extenders, HDMI signal can be transmitted over long distances via a single coaxial cable, which has extended transmission speed, uncompressed, zero latency, etc., can greatly reduce the cost of long-distance transmission of HDMI signal transmission distance of 100-300 meters.
Specifications
| TX Input Port | 1 x HDMI |
| TX Output Port | 1 x BNC (SDI/HD-SDI/3G-SDI) |
| RX Input Port | 1 x BNC (SDI/HD-SDI/3G-SDI) |
| RX Output Port | 1 x HDMI |
| SDI Transmission Rates | 2.970 G bit/s and 2.970/1.001 G bit/s |
| In/Output Resolution | 480i, 576i, 720p@50/59.94,60 ,1080i@50/59.94/60 |
| | 1080p@23.97/24/25/29.97/30/50/59.94/60 |
| Power Supply | DC 5V |
| ESD Protection Human body model | ±8kV(air-gapdischarge)±4kV (contact discharge) |
| Dimension | 82mm x 43.5mm x 23 mm |
| Weight | 215g |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | 20°C ~ 60°C / -4°F ~ 140°F |
| elative Humidity | 20 ~ 90% RH (Non*condensing) |
| Power Consumption (Max) | 5W |
Features
1. SDI interface operates at bit rates of 2.970 G bit/s, 2.970/1.001G bit/s, 1.485
G bit/s, 1.485/1.001G bit/s and 270 Mb/s.
2. Supports HDMI input timings: 480i@59.94, 576i, 720p@50/59.94/60,
1080i@50/59.94/60, 1080p@23.98/24/25/29.97/30/50/59.94/60.
3. HDMI TO SDI EXTEDNER:
(3.1) 480i/576i to SD-SDI (SMPTE 259M-C, at bit rates of 270 M bit/s)
720p/1080i to HD-SDI (SMPTE 292M, at bit rates of 1.485 G bit/s or
1.485/1.001 G bit/s)
(3.2 )1080p to 3G-SDI (SMPTE 424M/425M-AB, at bit rates of 2.970 G bit/s
and 2.970/1.001 G bit/s)
4. SDI Extender supports distance between TX to RX:100 meters (3G-SDI),
200 meters (HD-SDI), or 300 meters (SD-SDI)
5. Support 20~60KHz IR re-transmitting.
Panel descriptions
Please study the panel drawings below and become familiar with the signal
input(S),output(S)and power requirements.
Transmitter Panel
HDMI INPUT ------------------------------- HDMI input Interface
IR OUTPUT ----------------------------------- IR output Interface
SDI OUTPUT ------------------------------- SDI output Interface
Status --------------------------------------- Input Status Indicator
PW--------------------------------------------------- Power Indicator
DC 5V-------------------------------------------5V Power Interface
Receiver Panel
DC 5V-----------------------------------------5V Power Interface
IR INPUT -------------------------------------- IR Input Interface
PW------------------------------------------------- Power Indicator
Status---------------------------------------Input Status Indicator
SDI INPUT ---------------------------------SDI output Interface
HDMI OUTPUT ------------------------HDMI Output Interface
Installation and Operation
1. Connect the HDMI cable between TX and HDMI Source;
2. Connect SDI cable between TX and RX;
3. Connect the HDMI cable to RX and HDMI terminal display;
4. TX and RX respectively connected to power adapter;
5. Open the HDMI source and HDMI display device power products began
to work.
