HDMI Over Single CAT5e/6(120M) , 4K x 2K , Extender
Introduction
The 4K 120M HDMI extender uses one single Cat5e/6(recommended)cable instead of HDMI cable,you can extend the 4K signal to 120 Meters.The purpose of the extender is to achieve long-distance signale transmission with low- cost wires.
Specification
| Length of CAT-6 cable between Transmitter and Receiver | Up to 120 meters |
| HDMI Input/Output | 4Kx2K/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format | DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD |
| Max bandwidth | 340MHz |
| Max baud rate | 10.2Gbps |
| Input Video signal | 0.5~1.5Volts p-p |
| Output DDC signal | 5Volts p-p (TT1L) |
| Input/Output HDMI cable distance | ≤15m AWG26 HDMI standard cable |
| Max working current | 800mA |
| Power adapter format | Input:AC (50HZ, 60HZ) 100V*240V; Output: DC5V/1A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
| Dimension(L x W x H) | 100x73x25mm |
Features
1. Signal transmission :cat5e or cat-6(recommended) cables up to 120
meters instead of HDMI cables are connected between TX and RX
Extender;
2. Support HDMI1.4v;
3. Support input/Output Resolution :
4Kx2K@30Hz/1080p/1080i/720p/576p/576i/480p/480i;
4. Support Multi-receiver cascade transmission;
5. Support 20~60KHz IR dual re-transmitting;
6. Support CEC;
7. Audio format support :
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD;
Panel Descriptions
Please study the panel drawings below and become familiar with the signal
input(S),output(S)and power requirements.
HDMI EXTENDER TX PANEL
DC 5V------------------------------------DC Power Input Port
HDMI -------------------------------------HDMI Input indicator
HDMI Input -----------------------------------HDMI Input port
Cat5e/6 -------------------------------LAN cable Output port
HDMI Output ------------------------------HDMI Output port
IR-RX ------------------------------------------IR receiver port
IR-TX --------------------------------------IR Transmitter port
RS232 ----------------------------------------------RS232 port
HDMI EXTENDER RX PANEL
DC 5V------------------------------------DC Power Input Port
Select -----------------------------switch input signal Button
RJ45 --------------------------------------RJ45 Input indicator
HDMI ------------------------------------HDMI Input indicator
HDMI Input ----------------------------------HDMI Input port
Cat5e/6 In ---------------------------------Cat5e/6 Input port
Cat5e/6 -------------------------------LAN cable Output port
HDMI Out ----------------------------------HDMI Output port
IR-RX ------------------------------------------IR receiver port
IR-TX --------------------------------------IR Transmitter port
RS232 ----------------------------------------------RS232 port
Connect and Operate
ApplicationⅠ
(Point to point application)
ApplicationⅡ
(Multi-receiver cascade transmission)
1. Connect source device with transmitter by one HDMI cable(Max=10M).
2. Connect display device with receiver by one HDMI cable(Max=10M).
3. Connect TX with RX by one cat5e/6(Max=120M).
4. One pair of IR-RX and IR-TX cable,connected to the 3.5mm IR-RX and
IR-TX ports of the transmitter and receiver respectively.
5. Connect the power supply to the TX and RX.
6. LED indicator:When a signal is input to work,steady blue light.
7. Select the input source via the select button on the RX.
Product Tags:
|
|
340MHz 10.2Gbps 30HZ 120M HDMI 4K Extender Images
|
